• Features
  

            Compact Design             Overload / Phase Loss / Locked Rotor protection             Accurately display the working current (the highest current of L1 and L3) through the front panel LED display             When trip occurs, the cause is displayed on the LED window             Phase loss protection (3 seconds)             Convenient application: Selective use of single-phase (1P) and three-phase (3P) by DIP switch.             Optional contact output [fail-safe (N)/non-fail-safe (R)]: simplify the adjustment of the contact state

            Easy installation due to both Din Rail and Panel Mounting

• Used for

            Low Voltage Induced Electromotor (600V Level)

            Protective Relay

            Break-Down Watch Current Relay

            Alternative Replacement for the Existing Relay

• Protetcion

                    Protective Item Operating (Trip) Time                     Over-Current = O-TIME                     Phase Loss = 3 sec.                     Locked Rotor = After D-time（Operating current> 200% of set current）

• Set

                    After the installation is complete the settings as follows.                     Set knob: D-TIME(Delay Time) Set two to three seconds longer than the motor starting time.                     Set knob: O-TIME(Over-current run time) Set less than the motor's endurance time with over-current.                     Set knob: Load(Rated Current) Set over 110% of the motor's rated current of under 120% of its operating current

Specifications

Current Range :                Type05) 0.5-6A Type30) 3-30A Type60) 5-60A TYpe120) 10-120A Type600) Use an external CT(secondary 5A)over 120A with 05 type. Operating Voltage(Un).: Type220) 180-260VAC Operating Frequency : 50/60Hz Operating Power : <2W Operating Temperature : -20℃·····+55℃ Waiting(t) : D-Time 1-30s O-Time 1-10s Asymmetry Set : %±5 Contact : 5A 250VAC Resistive Load Connection Diagrams : 35mm Din Rail(D) or Pane(P)

• Model : PHSAMMPTOR